Every time you get into your car, you’ve to deal with an annoying noise from your squeaky car door. Wouldn’t that be unbearable for your day-to-day riding experience? Surely, you’d like to know how to fix a squeaky car door immediately.
Luckily, this automotive problem has very easy solutions with no extra tools required. Rather, you just take some of your time to kneel in front of the hinge and solve the issue.
WHY DOES IT SQUEAK?
When you first bought your car, your car hinges were coated in grease. However, over time, the grease wears away. As a result, you won’t be able to slide the doors effortlessly as before. You’ll need to apply lubrication to the hinges.
The hinges also undergo dirt and rust. So, you’ll feel the jam in the mechanism because of the noisy friction. When the grease wears away, the metal of your squeaky car rubs up against dry metal and creates the noise.
HOW CAN YOU FIX A SQUEAKY CAR DOOR?
To fix a squeaky car door, the first thing you need to do is find the exact location of the noise. Then you need to clean the area, which may clear out most of the dust and rust as well as the squeaking noise may reduce too.
Use a paper towel or wiper to pull out the filth and grit on the hinges. Remember to use a dry wiper where rust can form.
If it doesn’t work much, you may need to apply a multi-purpose automotive lubricant. Even if only one hinge squeaks, apply lubricant on all hinges.
TOP LUBRICANTS FOR CAR DOOR HINGES
- White Lithium Grease
- Silicon Spray
- Graphite Lubricant
It is recommended to shake the can well and read the instructions before use. Spray the grease on the top and bottom parts of all the car hinge contacts. Swing the door back and forth to utilize the lubricant properly.
You may want to use lubricants that come in spray bottles rather than powdered greases. They are more convenient to reach every corner of the car hinge and you can apply it in the exact spot.
Suggested: How to Get Smoke Smell Out of Car?
WAYS TO PREVENTION
- Avoid exposure to moisture
- Keep your door closed as much as possible
- Clean the hinges and use Silicon Spray on them from time to time
Lastly, don’t let your luxury turn into annoyance. Keep it clean and enjoy your ride!
How to open a car door with broken outside handle?
One fine evening. You decide to go on a long drive with your friends. You walk on to your car and grab the handle.
Shoot! The handle is completely broken, it just won’t work. Can’t you open the door now?
First, you need to diagnose how much core structural damage there is. The damage may happen on the door latch and it may lead to disconnection from the door lock assembly.
While doing the diagnosis, you need to look for internal and external connection issues. Also, check on the interior locking switch and door lock cylinder.
Here’s what you can do to open your car door with broken outside handle:
Lubricate the door latch
Lubricating the door latch certainly helps to fix car doors with stuck or broken handles. First, look for any blockage on the key-way. Adjust the lock assembly to find out where it gets stuck. Lubricate the latch and do the process again until there is no blockage.
Pull out the door panel
Disconnect any electrical connections attached to the door panel. Use screwdrivers to open up the screws of the panel. Store the screws in a separate place so that you can identify which screw goes back where.
After removing the panel, pull out its plastic cover. Look into the mechanisms and inside shafts to find where the issue is. Connect a nut at the end of the shaft. It will make the grip tight enough to enable the door to be opened from outside.
Finally, recheck the lock assembly and door lock motor.
Call in a locksmith
To ensure minimum damage while fixing the door, call in a professional locksmith.
Change the handle
Instead of fixing an old broken handle, replace it with a new one.
Last Updated on November 21, 2020 by Marcus Ford